Model: Rollway

High Speed Sheet Shutter

SHEET IS ROLLED UP

by a simple and unique mechanism, offering such efficient operation.

Low maintenance, short time recovery.

  • Build-in Reinforcing Pipe is easily and manually straighten when it was hit or deformed.
  • Patch and fix by a repair tape, if the sheet is slightly damage.
Yearly energy loss (10 kcal)
Comparison of total operating time open-close at 100 times a day

Excellent for energy saving.

  • Obviously, total operating time of open-close at 100 times a day between rollway and heavy steel shutter, Rollway gives highly efficient result to improve working environment, air leakage control and saving energy.
  • Based on the inside-outside temperature difference at 5℃, if running air conditioner constantly 60 days.

(NOTES) : Comparison of energy loss and total operating time based on shutter size 4 x 4 meters, the calculation results may very based on wind speed, temperature and other conditions.

  • In AUTO operation, Opening Height (OH) can be set on preferred height. (Option)
  • All components have been sufficiently tested.
  • Which the protective structure, it can prevent and reduce dust and moisture to accumulate inside

PRODUCT : HIGHT SPEED SHEET SHUTTER

MODEL : RWTH-1E, 2E RWTH-Airtight​

SPECIFICATION

Temperature Resistibilities Normal Ambient Temp : 25 C ∼ 0 C
Hot Room Temp : 70 C MAX
Cold Room Temp : 0 C MIN
Frame Zinc Dip Coated Steel (SUPERDYMA)
Thickness 1.6 or 2.0 + 0.5 mm
No painting
Motor Geared motor with Brake
0.4Kw ∼ 1.5 Kw
Available for 380V / 50 Hz 3 phase
Available for 220V / 50 Hz 3 phase
Installed to inside top Frame
Curtain (Sheet) Polyester –Base PVC Coated Sheet
Thickness 0.45 + 0.2 mm
Ivory, Green, Blue, Orange, Gray, Transparent color
Fiber Transparent, PVC, Mesh (Net)
Containing built-in Reinforcing Pipe
Roll-Up Belt Reinforced Polyester Fiber
Black color

 

Control System

Sequence Control with PLC
Infrared Sensor Control (Option)
Remote Control (Option)
Pull Switch (Option)
2 Sets Safety Beam Sensor inside Frame

Feature & Dimensions

Width x Height Standard MIN 1,600 x 1,200 mm
MAX 8,000 x 5,100 mm
Special Big Sizes Available
Curtain Characteristics GLOSS Surface
Transparent Center Window
Sheet Shutter Speed 0.8m/sec
Installation Outdoor side Cling with Concrete Wall
Indoor Side Cling with Concrete Wall

 

Basic Specification

SPECIFICATION

1E, 2E Specification AIRTIGHT Specification
Model RWTH-1E, 2E AIRTIGHT 
OPEN-CLOSE Speed 0.8 ∼ 0.5m/sec
RWTH-1E,
Motor Geared motor with brake 0.4 ∼ 1.5 Kw
Power Supply 3phase 380V+N (Special oder to other voltage is Preferable)
Opening Width (OW) 1.6 m ∼ 8.0 m
Opening Height (OH) 1.2 m ∼ 5.1 m
Safety Beam sensor Photo – electric SW 2 – Phase
Control Box Height 450 mm Width 270 mm depth 170 mm
Temperature Resistibility 0 ∼ 70 C
AIRTIGHT Loss Positive Pressure 16.1 (m3/m2/h) 9.3 (m3/m2/h)
Negative Pressure 31.1 (m3/m2/h) 11.5 (m3/m2/h)

 

Electric Current ROLLWAY

Motor (kw)

Breaker (A.) Current (A.)
0.4 1-1.6 1
 0.75  1.6-2.5  1.8
 1.5  2.5-4  3.3

 

Color & Material (Sheet, Frame)

STANDARD​

PVC

OPTION​

FIBER TRANSPARENTS
PVC MESH
FRAME COLOR
  • Frames are made of highly corrosion-resistant Coated Steel sheets.

Stainless steel or Coating steel.

Option Lists

SENSOR (INFRARED SENSOR)​

Mounting height : 2.0 to 4 m
Power supply : 12 to 30 VDC

Mounting height : 2.0 to 6 m
Power supply : 24 VDC​

Mounting height : 2.5 to 6.5 m
Power supply : 12 to 30 VDC​

REMOTE CONTROLLER

Detecting distance : 30 m​

Detecting distance : 100 m​

LOOP SENSOR

Detection time : 4ms@100kHz loop frequency
Power supply : 10 to 40 VDC​

Detection time : 10ms@40kHz loop frequency
Power supply : 10 to 40 VDC​

OTHER

PUSH SWITCH​

PULL SWITCH​

SAFETY POLE​

SIGNAL LIGHT​

Reference

Auto part​
Paintingroom
Big Door
Conveyor
Electronic
Packaging
Steel